Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
REFRIGERANT PRESSURE SENSOR
Removal and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Discharge the refrigerant. Refer to See: Service and Repair/Refrigeration System .
2. Disconnect the refrigerant pressure sensor electrical connector and remove the refrigerant pressure sensor from the condenser.
CAUTION:
Be careful not to damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal. Refer to See: Description and Operation/Refrigeration System/Component .
CAUTION:
-
Be careful not to damage the condenser fins.
-
Replace the O-ring of the refrigerant pressure sensor with a new one, then apply compressor oil to it when installing it.
-
After charging refrigerant, check for leaks.