Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
METER BUZZER CIRCUIT
Diagnosis Procedure
1.CHECK POWER SUPPLY OF COMBINATION METER
Check power supply of combination meter. Refer to See: Power Supply And Ground Circuit/Combination Meter.
Is the inspection result normal?
YES - Inspection End.
NO - Repair power supply circuit of combination meter.
Component Function Check
SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
Component Function Check
1.CHECK COMBINATION METER INPUT SIGNAL
Select "DATA MONITOR" for "METER/M&A" and check the "SEAT BELT W/L" monitor value.
- Inspection End.
Diagnosis Procedure
SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
Description
Transmits a seat belt buckle switch signal to the combination meter.
SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT
Diagnosis Procedure
1.CHECK COMBINATION METER INPUT SIGNAL
1. Turn ignition switch ON.
2. Check voltage between combination meter harness connector M24 terminal 27 and ground.
Is the inspection result normal?
YES - Replace combination meter. Refer to See: Instrument Cluster / Carrier/Service and Repair/Removal and Replacement.
NO - GO TO 2
2.CHECK SEAT BELT BUCKLE SWITCH CIRCUIT