Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Courtesy Lamp: Service and Repair
INTERIOR ROOM LAMP
Removal and Installation
ROOM/MAP LAMP
Removal
1. Disconnect the negative battery terminal.
2. Remove overhead console (3). Refer to See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
3. Disconnect connectors (4) and remove the room/map lamp screws (1), then remove room/map lamp (2) from overhead console (3).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery terminal.
2. Using a suitable tool (A), remove room/map lamp lens (1).
CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing and lens (1).
3. Release one side of the bulb (2) from the tab, then pull straight downward to remove.
Room/map lamp bulb : 12V - 6W
VANITY MIRROR LAMP