Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
1. Disconnect the negative battery terminal.
2. Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.
CAUTION:
Wrap a cloth around the suitable tool to protect door finisher and lens.
3. Disconnect the step lamp connector, then remove step lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove the step lamp lens/socket.
3. Pull the bulb straight out to remove.
Step lamp bulb : 12V - 3.8W
PERSONAL LAMP - TYPE A (if equipped)
Removal
1. Disconnect the negative battery terminal.
2. Remove overhead console. Refer to See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
3. Remove personal lamp screws (3).
4. Disconnect personal lamp electrical connectors (1), then remove personal lamp (2) from overhead console.