Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Fog/Driving Lamp: Service and Repair
Removal And Installation
FRONT FOG LAMP
Removal and Installation
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
CAUTION:
-
Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect
the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
-
Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb
life and/or fog lamp performance.
Removal
1. Position the fender protector aside.
2. Disconnect electrical connector.
3. Remove nut and pull fog lamp out of front fascia.
Installation
Installation is in the reverse order of removal.