Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Camshaft Position Sensor: Service and Repair
INTAKE VALVE TIMING CONTROL
Camshaft Position Sensor (PHASE)
REMOVAL
1. Remove engine room cover using power tool. Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover.
2. Remove air duct and resonator assembly. Refer to See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair/Removal and
Installation.
3. Disconnect camshaft position sensor connector.
4. Remove camshaft position sensor (2) from Intake valve timing control solenoid valve cover (LH) (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring (3) of the camshaft position sensor with a new one, then lubricate O-ring with engine oil before installing.
Camshaft position sensor bolt : 9.6 N.m (0.98 kg-m, 85 in-lb)