Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
2. Install differential lock position switch on gear carrier and tighten differential lock position switch bolts with the specified torque. Refer to See:
Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive M226 (ELD).
3. Install side bearing adjusters into gear carrier.
4. Apply gear oil to side bearings. Install differential case assembly with side bearing outer races into gear carrier.
5. Apply multi-purpose grease to differential lock position connector.
CAUTION:
Do not reuse sensor connector.
6. Connect differential lock solenoid harness (B) and differential lock position switch connector (A). Then install it to gear carrier, tighten to the
specified torque. Refer to See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive M226 (ELD).
Arrow Indicate Front
7. Align paint matching mark on side bearing caps with that on gear carrier and install side bearing caps on gear carrier without tightening to
specification.