Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Variable Valve Timing Actuator Position Sensor: Service and Repair
Intake Valve Timing Control Position Sensor (RH)
INTAKE VALVE TIMING CONTROL
Intake Valve Timing Control Position Sensor (RH)
REMOVAL
1. Remove engine room cover using power tool. Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover.
2. Disconnect intake valve timing control position sensor connector (RH).
3. Remove intake valve timing control position sensor (RH) (1) from Intake valve timing control solenoid valve cover (RH) (3).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring (2) of the intake valve timing control position sensor with a new one, then lubricate O-ring with engine oil before
installing.
Intake valve timing control position sensor bolt : 9.6 N.m (0.98 kg-m, 85 in-lb)