Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Seals and Gaskets: Service and Repair
Rear Final Drive M226 (ELD)
FRONT OIL SEAL
Removal and Installation
REMOVAL
1. Remove rear propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft 3S1410.
2. Remove brake calipers and rotors. Refer to See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear.
3. Measure the total preload torque. Refer to See: Service and Repair/Overhaul/Rear Final Drive M226 (ELD).
NOTE:
Record the total preload torque measurement.
4. Remove the drive pinion nut using Tool.
Tool number : KV40104000 ( - )
5. Put matching marks on the companion flange and drive pinion using paint.
CAUTION:
Use paint to make the matching marks. Do not damage the companion flange or drive pinion.
6. Remove the companion flange using suitable tool.
7. Remove the front oil seal using Tool.
Tool number : ST33290001 (J-34286)