Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
1. Raise the glass to the top.
2. While pressing and holding the reset switch, lower the glass to the bottom.
3. Release the reset switch. Verify that the reset switch returns to the original position, if not pull the switch using suitable tool.
4. Raise the glass to the top position
CAUTION:
Do not operate the glass automatically to raise the glass to the top position.
REPAIRING WATER LEAKS FOR REAR WINDOW GLASS
Leaks can be repaired without removing or reinstalling glass.
If water is leaking between butyl adhesive material and body or glass, determine the extent of leakage.
This can be done by applying water to the rear window area while pushing glass outward.
To stop leak, apply primer (if necessary) and then butyl adhesive to the leak point.