Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Windshield: Service and Repair
WINDSHIELD GLASS
Removal and Installation
REMOVAL
1. Remove inside mirror. Refer to See: Body and Frame/Mirrors/Service and Repair/Inside Mirror.
2. Partially remove the headlining (front edge). Refer to See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair.
3. Remove cowl top cover. Refer to See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair.
4. Apply a protective tape around the windshield glass to protect the painted surface from damage.
-
Remove glass using piano wire or power cutting tool and an inflatable pump bag.
-
If the windshield glass is to be reused, mark the body and the glass with mating marks.
WARNING:
When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering your eyes
or cutting your hands.
CAUTION:
-
When the windshield glass is to be reused, do not use a cutting knife or power cutting tool.
-
Be careful not to scratch the glass when removing.
-
Do not set or stand glass on its edge. Small chips may develop into cracks.
INSTALLATION