Titan 4WD V8-5.6L (VK56DE) (2006)
^
Remove No. 1 camshaft bracket.
NOTE: The bottom and front surface of bracket will be stuck because of liquid gasket.
^
<-: Engine front
^
B: Exhaust
^
D: Intake
11. Remove the camshaft.
12. Remove the valve lifters if necessary.
^
Correctly identify location where each part is removed from. Keep parts organized to avoid mixing them up.
INSTALLATION
1. Install the valve lifters if removed.
^
Install removed parts in their original locations.
2. Install the camshafts. Refer to the table for identification of the RH and LH, and intake and exhaust.
^
Install so that the RH bank (B) dowel pins (A) and LH bank (C) dowel pins (A) at the front of the camshaft face are in the direction shown.