Titan 4WD V8-5.6L (VK56DE) (2006)
/Page-1846002.png)
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
^ For Titan and Armada: follow the procedure outlined in this bulletin for intake sensor replacement.
^ For Quest, Xterra, Frontier and Pathfinder: refer to the appropriate section in the Electronic Service Manual (ESM) for intake sensor replacement.
1. Remove six bolts from the glove box.
2. Remove glove box. The intake sensor is located behind the glove box.
3. Disconnect the intake sensor electrical connector.
