Titan 4WD V8-5.6L (VK56DE) (2006)
Refrigerant Pressure Sensor / Switch: Service and Repair
Manual Air Conditioner
Removal and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Disconnect the refrigerant pressure sensor electrical connector.
2. Disconnect the refrigerant pressure sensor electrical connector and remove the refrigerant pressure sensor from the condenser.
CAUTION: Be careful not to damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal. Refer to "Components".
CAUTION:
-
Be careful not to damage the condenser fins.
-
Replace the O-ring of the refrigerant pressure sensor with a new one, then apply compressor oil to it when installing it.
-
After charging refrigerant, check for leaks.