Titan 4WD V8-5.6L (VK56DE) (2006)
Differential (Without Electronic Locking)/Removal and Installation
Refer to "Removal and Installation" (RFD with ELD). See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Rear
Differential (With Electronic Locking)/Removal and Installation
FILLING
1. Remove the filler plug. Fill with new specified gear oil until the gear oil level reaches the specified limit near the filler plug mounting hole as
shown.
Oil grade and capacity: Refer to MA-11, "Fluids and Lubricants". See:
2. After refilling the gear oil, check the gear oil level as shown. Apply sealant to the filler plug. Install the filler plug on the final drive assembly and
tighten to specification.
^
Use Genuine Silicone RTV or equivalent.
Filler plug: Refer to "COMPONENTS" (FFD).
Refer to "Removal and Installation" (RFD without ELD). See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Rear
Differential (Without Electronic Locking)/Removal and Installation
Refer to "Removal and Installation" (RFD with ELD). See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Rear
Differential (With Electronic Locking)/Removal and Installation