nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Air Bag Control Module > < Recall 06V459000: Seat Belt Wire Harness Modification
Page 1
background image

Air Bag Harness: Recalls
Recall 06V459000: Seat Belt Wire Harness Modification

MAKE/MODELS:           MODEL/BUILD YEARS:      
     
Nissan/Titan               2004-2006
 
MANUFACTURER: Nissan North America, Inc.   
 
NHTSA CAMPAIGN ID NUMBER: 06V459000  MFG'S REPORT DATE: November 22, 2006 

COMPONENT: Electrical System 

POTENTIAL NUMBER OF UNITS AFFECTED: 96500 

SUMMARY: 
 On certain crew cab trucks, the wires in the harness were routed through the rear doors and into the body. These wires may break due to over bending of
the harness as the door is opened and closed. The harness contains wires for the driver seat belt pretensioner and for the front passenger seat belt which is
part of the occupant classification system. Wires for the rear audio speakers are also contained in the harness. 

CONSEQUENCE: 
 If the wires for the seat belts and speaker wires break and make contact, there is a possibility that the pretensioner may deploy. If this happens when the
seat belt is retracted, it will not be possible to use the seat belt. If one of the wires on the right side harness for the seat belt tension sensor breaks, the
passenger side front air bag will not deploy as designed in a frontal collision increasing the risk of a crash and personal injury. 

REMEDY: 
 Dealers will replace the wire harness cover with a different type that prevents over bending of the harness and the harness will be rerouted free of
charge. The recall is expected to begin on or about February 19, 2007. owners may contact Nissan at 1-800-647-7261. 

NOTES: 
 Customers may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153),
or go to http://www.safercar.gov.

Air Bag Control Module > < Recall 06V459000: Seat Belt Wire Harness Modification