Titan 4WD V8-5.6L (VK56DE) (2006)
2. Remove the shock absorber lower bolt using power tool.
3. Remove the three shock absorber upper nuts using power tool.
4. Remove the coil spring and shock absorber assembly.
^
Turn steering knuckle out to gain enough clearance for removal.
INSTALLATION
Installation is in the reverse order of removal.
^
The lower seat step (2) in the shock absorber assembly (1) faces outside of vehicle.
-
Upper spring insulator (3)
-
<=: Front
^
Tighten all nuts and bolts to specification. Refer to "Components".
^
When installing wheel and tire, refer to "Rotation". See: Wheels and Tires/Tires/Service and Repair/Tire Rotation
Rear Suspension
Removal and Installation