Titan 4WD V8-5.6L (VK56DE) (2006)
8. Install bolts A, B and C in control valve with TCM.
9. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. Then tighten them in order (1 -> 2 -> 3), and then tighten other bolts.
10. Tighten control valve with TCM bolts to the specified torque. Refer to "Components". See: Service and Repair/Overhaul (Component
Parts)/Components
11. Connect A/T fluid temperature sensor 2 connector.
12. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips.