Titan 4WD V8-5.6L (VK56DE) (2006)
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Remove the ABS sensor, and position it out of the way.
^ See the BRC section of the applicable Electronic Service Manual for removal instructions.
2. Remove the rear brake rotor.
^ See the BR section of the applicable Electronic Service Manual for removal instructions.
3. Disconnect the parking brake cable from the parking brake assembly.
^ See the PB section of the applicable Electronic Service Manual for instructions.
4. Remove the four (4) axle shaft bearing cage nuts and lock washers.
5. Remove the axle shaft assembly using suitable tools.