nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 7455 > < Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 7453

Titan 4WD V8-5.6L (VK56DE) (2006)

Page 7
background image

8. Install bolts A, B and C in control valve with TCM.

9. Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. Then tighten them in order (1 -> 2 -> 3), and then tighten other bolts.

10. Tighten control valve with TCM bolts to the specified torque. Refer to "Components". See: Automatic Transmission/Transaxle/Service and

Repair/Overhaul (Component Parts)/Components

11. Connect A/T fluid temperature sensor 2 connector.

12. Securely fasten terminal cord assembly and A/T fluid temperature sensor 2 harness with terminal clips.

Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 7455 > < Control Valve With TCM and A/T Fluid Temperature Sensor 2|Page 7453