nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Transfer Case Actuator Relay > < Transfer Case Actuator|Service and Repair|Page 7568

Titan 4WD V8-5.6L (VK56DE) (2006)

Page 4
background image

c. Tighten bolts to the specified torque. Refer to "COMPONENTS".

3. Install breather hose to transfer control device.
4. Connect transfer control device harness connector.
5. After the installation, check 4WD shift indicator pattern. If NG, adjust position between transfer assembly and transfer control unit. Refer to

"Precautions for Transfer Assembly and Transfer Control Unit Replacement".  See: Service Precautions/Vehicle Damage Warnings/Precautions
For Transfer Assembly and Transfer Control Unit Replacement

Transfer Case Actuator Relay > < Transfer Case Actuator|Service and Repair|Page 7568