Titan 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Brake Pedal Assy: Adjustments
Adjustable Pedal
BRAKE PEDAL
Inspection and Adjustment - Adjustable Pedal
INSPECTION
1. Inspect the brake pedal free height (H) from the floor using Tool at a 90° angle to the floor as shown.
Tool number : - (J-46532)
2. Adjust the height referring to the following specifications.
CAUTION:
When equipped with adjustable pedal, the pedal must be in the forward most (closest to the floor) position for pedal height measurement.
ADJUSTMENT
1. Loosen the stop lamp switch and ASCD cancel switch by turning them 45° counterclockwise.
2. Loosen lock nut (A) on the input rod, then turn input rod to adjust the brake pedal to the specified height. When finished adjusting, tighten the lock
nut (A) to specification.