nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Cooling System|Capacity Specifications|Page 1565 > < Cooling System|Capacity Specifications|Page 1563
Page 2
background image

NOTE:
Apply engine coolant to the cap seal.
-

Replace the reservoir cap if there is any damage in the negative-pressure valve, or if the open-valve pressure is outside of the limit.

CHECKING RADIATOR CAP
Inspect the radiator cap.

NOTE:
Thoroughly wipe out the radiator filler neck to remove any waxy residue or foreign material.
-

Replace the cap if the metal plunger cannot be seen around the edge of the black rubber gasket.

-

Replace the cap if deposits of waxy residue or other foreign material are on the black rubber gasket or the metal retainer.

-

Pull negative-pressure valve to open it and make sure that it closes completely when released.

-

Make sure that there is no dirt or damage on the valve seat of radiator cap negative-pressure valve.

-

Make sure that there are no unusualness in the opening and closing conditions of negative-pressure valve.

Cooling System|Capacity Specifications|Page 1565 > < Cooling System|Capacity Specifications|Page 1563