Titan 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
Front Crankshaft Seal: Service and Repair
OIL SEAL
Removal and Installation of Front Oil Seal
REMOVAL
1. Remove the engine. Refer to See: Service and Repair/Removal and Replacement/Engine Assembly/Removal and Installation.
2. Remove the crankshaft pulley. Refer to See: Timing Components/Timing Chain/Service and Repair/Removal and Installation.
3. Remove the front oil seal using suitable tool.
CAUTION:
Do not damage front cover and oil pump drive spacer.
INSTALLATION
1. Apply new engine oil to both the oil seal lip and dust seal lip of the new front oil seal.
2. Install the front oil seal.
-
Install the front oil seal so that each seal lip is oriented as shown.
-
Press-fit until the height of the front oil seal is level with the mounting surface using suitable tool.
CAUTION:
-
Do not damage front timing chain case and crankshaft.
-
Press-fit straight and avoid causing burrs or tilting oil seal.
3. Installation of the remaining components is in the reverse order of removal.