nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Drive/Propeller Shaft|Specifications > < Drivetrain - Driveshaft U-Joint Noise/Vibration
Page 1
background image

Drive/Propeller Shaft: All Technical Service Bulletins
Drivetrain - Driveshaft U-Joint Noise/Vibration

Classification: PD10-001

Reference: NTB10-052

Date: April 8, 2010

NOISE AND/OR VIBRATION FROM PROPELLER SHAFT U-JOINT (JOURNAL/JOURNAL BEARINGS)

APPLIED VEHICLES: 
2004-2010 Armada (TA60) 
2004-2010 Titan (A60) 
2005-2010 Frontier (D40) 
2005-2010 Pathfinder (R51) 
2005-2010 Xterra (N50)

IF YOU CONFIRM

The propeller shaft u-joint (journal/journal bearings) is the source of noise and/or vibration on an Applied Vehicle.

Diagnose by evaluating the u-joint with the propeller shaft removed. If the u-joint axial play or flex effort exceed the specifications in the Electronic
Service Manual (ESM), or if a "ratchety" feel is exhibited during rotation, the u-joint (journal/journal bearings) should be replaced.

ACTION

Replace the u-joint (journal/journal bearings).

^ Refer to the applicable ESM for removal and installation instructions.

NOTE:

Do not replace the entire propeller shaft assembly if u-joint (journal/journal bearings) replacement can resolve the incident, should it occur.

PARTS INFORMATION

U-joint (journal/journal bearings) kits are now available for all Applied Vehicles. Refer to the electronic parts catalog (FAST or equivalent) to locate the
appropriate parts needed for this repair.

CLAIMS INFORMATION

Reference the current Nissan Warranty Flat Rate Manual and use the indicated FRT and appropriate coding for repairs preformed.

Drive/Propeller Shaft|Specifications > < Drivetrain - Driveshaft U-Joint Noise/Vibration