Versa L4-1.6L (HR16DE) (2010)
b. Use a feeler gauge, measure the clearance between valve lifter and camshaft.
Valve Clearance: See: Engine, Cooling and Exhaust/Engine/Camshaft, Lifters and Push Rods/Camshaft/Specifications
-
Measure the valve clearances at locations marked "x" as shown in the table below [locations indicated with black arrow
( Black arrow ) as shown] with a feeler gauge.
c. Rotate crankshaft pulley (2) one revolution (360 degrees) and align TDC mark (without paint mark) (A) to timing indicator (1) on front cover.
B : White paint mark (Not use for service)