Versa L4-1.8L (MR18DE) (2009)
7. Remove the outer handle mounting bracket assembly by carefully removing its rivet ("a") with a suitable tool (see Figure 8).
NOTE:
With most of the rivet head removed, it can then be carefully tapped out with a hammer and punch.
CAUTION:
Be careful not to damage the seat frame.
8. Remove the inner and outer tracks by removing their four (4) mounting nuts (no picture shown).
9. Remove the slide release handle ("a") and both mounting bracket sub-assemblies (brackets; "b") together. See Figure 9.
NOTE:
The inner bracket is not shown in Figure 9.
^ Unhook the outer holder spring ("c") from the seat frame while removing the slide release handle and both brackets.
Install Service Kit
Install Inner Track Assembly