Versa L4-1.8L (MR18DE) (2009)
Drive Belt: Removal and Replacement
Component
DRIVE BELTS
Component
Removal and Installation
DRIVE BELTS
Removal and Installation
REMOVAL
1. Hold the hexagonal part (A) of drive belt auto-tensioner (1) with a wrench securely. Then move the wrench handle in the direction of arrow
(loosening direction of tensioner).
WARNING:
Never place hand in a location where pinching may occur if the holding tool accidentally comes off.
2. Insert a rod such as short-length screwdriver approximately 6 mm (0.24 in) in diameter into the hole (B) of the retaining boss to fix drive belt
auto-tensioner.
3. Remove drive belt.
INSTALLATION
1. Hold the hexagonal part (A) of drive belt auto-tensioner (1) with a box wrench securely. Then move the wrench handle in the direction of arrow
(loosening direction of tensioner).