Xterra 2WD V6-3.3L SC (VG33ER) (2003)
Heater Core: Service and Repair
REMOVAL AND INSTALLATION
REMOVAL
1. Drain cooling system. Refer to "DRAINING ENGINE COOLANT".
2. Disconnect the two heater hoses from the engine compartment side.
3. Remove the cooling unit.
4. Remove the steering member assembly. Refer to "INSTRUMENT PANEL ASSEMBLY". See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair
5. Remove the heater unit.
6. Remove the heater core.
INSTALLATION
Installation is the reverse order of removal. Inspect system for coolant leaks. Refer to "REFILLING ENGINE COOLANT".