Xterra 2WD V6-3.3L SC (VG33ER) (2003)
Components
Removal
1. Release the fuel pressure.
2. Remove the timing belt.
3. Drain the engine coolant by removing the drain plugs from both sides of the cylinder block as shown.
4. Separate the ASCD and the accelerator control wires from the intake manifold collector (VG33E only).
5. Remove the intake manifold collector from the engine (VG33E only).
6. Disconnect the following parts:
a. Harness connectors for:
^
IACV-AAC valve