Xterra 2WD V6-3.3L SC (VG33ER) (2003)
Evaporator Case: Service and Repair
EVAPORATOR
REMOVAL
1. Discharge the A/C system. Refer to "Discharging Refrigerant". See: Refrigerant/Service and Repair
2. Disconnect the two evaporator core refrigerant lines from the engine compartment side.
-
Cap the refrigerant lines to prevent moisture from entering the system.
3. Remove the glove box and mating trim. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
4. Disconnect the thermal amp. connector.
5. Remove the cooling unit.
6. Separate the cooling unit case, and remove the evaporator.