nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Recall - Fuel Sending Unit Inspection/Replacement|Page 5243 > < Recall - Fuel Sending Unit Inspection/Replacement|Page 5241

Xterra 2WD V6-3.3L SC (VG33ER) (2003)

Page 29
background image

a. First, use shop air to clean the area around the Fuel Sending Unit and Mounting Flange (see Figure 35).

b. Then, apply Rust Penetrant (999MP-A3020P) to the Fuel Sending Unit Mounting Flange Bolts (see Figure 36). Allow the penetrant to "soak" for a
few minutes.

c. Using hand tools ONLY, gently remove the Fuel Sending Unit Mounting Flange Bolts.

4. Remove the Fuel Sending Unit.

NOTE:

To disconnect the fuel return hose from the Fuel Sending Unit, do the following:

Recall - Fuel Sending Unit Inspection/Replacement|Page 5243 > < Recall - Fuel Sending Unit Inspection/Replacement|Page 5241