Xterra 2WD V6-4.0L (VQ40DE) (2006)
/Page-624008.png)
^
When handling camshaft sprocket (INT), be careful of the following:
CAUTION:
^
Handle carefully to avoid any shock to camshaft sprocket.
^
Do not disassemble. (Do not loosen bolts "A" as shown).
28. Remove water pump.
29. Remove rear timing chain case as follows:
a. Loosen and remove bolts with power tool in reverse order as shown.
b. Cut liquid gasket using Tool and remove rear timing chain case.
Tool number: KV10111100 (J-37228)
CAUTION:
^
Do not remove plate metal cover of oil passage.
^
After removal, handle rear timing chain case carefully so it does not tilt, cant, or warp under a load.
30. Remove O-rings from cylinder head and camshaft bracket (No. 1).
