Xterra 2WD V6-4.0L (VQ40DE) (2006)
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
-
A new style slide-locking type connector is used on certain systems and components, especially those related to OBD.
-
The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection.
-
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the illustration.
CAUTION:
-
Do not pull the harness or wires when disconnecting the connector.
-
Be careful not to damage the connector support bracket when disconnecting the connector.
HARNESS CONNECTOR (LEVER LOCKING TYPE)
-
Lever locking type harness connectors are used on certain control units and control modules such as ECM, ABS actuator and electric unit (control
unit), etc.
-
Lever locking type harness connectors are also used on super multiple junction (SMJ) connectors.
-
Always confirm the lever is fully locked in place by moving the lever as far as it will go to ensure full connection.