Xterra 4WD V6-3.3L SC (VG33ER) (2003)
/Page-1701015.png)
^
Before performing any of the Service Procedures below, be certain there are no ignition sources (i.e., open flames, sparks, etc.) in or around the
vehicle/work area.
^
Make sure the appropriate rated fire extinguisher is available for immediate use.
^
Use suitable protective gloves, safety glasses, or face shield.
CAUTION:
Use suitable covers to protect carpet, upholstery, etc.
NOTE:
The Fuel Sending Unit that you remove from the vehicle may look different from the new replacement service part (see Figure 43 above).
1. Release the fuel pressure from the fuel system using CONSULT-II (or other suitable method). Follow the procedure in the "EC" section of the Service
Manual.
2. Use a suitable device to remove the fuel from the fuel tank.
3. Remove the fuel tank:
^
For detailed instructions on fuel tank removal and installation, refer to the vehicle specific Service Manual, Section FE (Fuel And Exhaust)/Fuel
System/Removal and Installation/Fuel Tank.
WARNING:
