Xterra 4WD V6-3.3L SC (VG33ER) (2003)
^
Then, re-install the rubber dust cap on the wheel cylinder bleeder screw.
12.
Return to the "Repair Flow Chart" for further instructions.
Procedure E: Axle Bearing Replacement
DISASSEMBLY
ABS Rotor Ring Removal
1.
Slide the Sleeve # J-25852-4 onto the Extension Tube # J-45073-12 (see Figure E1).
2.
Install/turn the forcing screw # J-45073-13 into the end of the extension tube a couple of threads.
NOTE:
Apply Extreme Pressure Lubricant # J-23444-A to the Forcing Screw for smooth operation.
3.
Now Slide the Extension Tube (with Sleeve) over the vehicle's axle shaft (see Figure E2).