Xterra 4WD V6-4.0L (VQ40DE) (2009)
8. For installation, apply a paint matching mark on one side of side bearing cap.
CAUTION:
-
Side bearing caps are line-board for initial assembly. The matching marks are used to install them in their original positions.
-
For matching mark, use paint. Do not damage side bearing cap.
9. Remove adjuster lock plates.
10. Remove side bearing caps.
11. Loosen the side bearing adjusters using Tool.
Tool number : - (C - 4164)
12. Keep side bearing outer races together with inner races. Do not mix them up. Also, keep side bearing adjusters together with bearing.
13. Remove side bearing adjusters from axle housing.
14. Remove the differential lock position switch harness from the bracket.