Xterra SE 4WD V6-3.3L (VG33E) (2000)
-
After performing each TROUBLE DIAGNOSIS, perform "DTC Confirmation Procedure" or "Overall Function Check".
The DTC should not be displayed in the "DTC Confirmation Procedure" if the repair is completed. The "Overall Function Check" should be a
good result if the repair is completed.
-
When measuring ECM signals with a circuit tester, never allow the two tester probes to contact. Accidental contact of probes will cause a short
circuit and damage the ECM power transistor.
-
Regarding model D22, "-B1" indicates the right bank and "-B2" indicates the left bank as shown in the figure.