Xterra SE 4WD V6-3.3L (VG33E) (2000)
/Page-1192001.png)
Evaporative System Service Port: Testing and Inspection
Evap Service Port
Positive pressure is delivered to the EVAP system through the EVAP service port. If fuel vapor leakage in the EVAP system occurs, use a leak detector
to locate the leak.
How to Detect Fuel Vapor Leakage
CAUTION:
-
Never use compressed air or a high pressure pump.
-
Do not exceed 4.12 kPa (0.042 kg/sq.cm, 0.6 psi) of pressure in EVAP system.
NOTE:
-
Do not start engine.
-
Improper installation of EVAP service port adapter to the EVAP service port may cause a leak.
With CONSULT
