Xterra SE 4WD V6-3.3L (VG33E) (2000)
CAUTION: Be careful not to apply grease or oil to taper of joint.
IDLER ARM ASSEMBLY
^
Check rubber bushing of idler arm for breakage, wear or play, and if necessary replace.
^
Lubricate idler arm assembly with multi-purpose grease, if necessary.
CROSS ROD AND TIE-ROD
Check tie-rod and cross rod for breakage, bends and cracks, and replace with a new one if necessary.
FIXING LOCATION
^
Check fixing location (nuts and cotter pins) for looseness, play or breakage.
^
When looseness or play is found, check for wear on tapered portion of joints, gear arm or idler arm.
^
When reassembling each joint, use new cotter pins.