Xterra SE 4WD V6-3.3L (VG33E) (2000)
Check the following items, and replace if necessary.
^
Release bearing, to see that it rolls freely and is free from noise, cracks, pitting, or wear.
^
Release sleeve and withdrawal lever rubbing surface, for wear,
Lubrication
^
Apply recommended grease to contact surface and rubbing surface.
^
Too much lubricant might damage clutch disc facing.
Waterproof-for 4WD Model
^
Apply recommended sealant to contact surface of dust cover to transmission case and withdrawal lever and then install dust cover clip.
Recommended sealant: Nissan genuine part (KP11500100), Three Bond TB1212, Loctite Part Number 51813, or equivalent