Xterra SE 4WD V6-3.3L (VG33E) (2000)
2.
To confirm proper assembly after the replacement center bearing is installed, check the alignment of the front and middle u-joints (see Figure 2).
If there is vibration after the propeller shaft is re-assembled, re-check the propeller shaft alignment (Figure 2, above).
PARTS INFORMATION
CLAIMS INFORMATION
NOTE:
This is the ONLY approved repair procedure for this incident. A claim to Nissan for the repair of this incident may be denied if the repair is not
performed exactly as outlined in this bulletin.
Submit a Primary Failed Part (PP) line using the claims coding as shown.
1.
Reference the "Parts Information" table above and use the indicated "Center Bearing Kit" P/N as the PFP.
2.
As indicated by the customer complaint.
3.
As indicated by the technician's diagnosis.