nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Throttle Full Close Switch > < Throttle Body|Specifications|Page 6841

Xterra XE 4WD V6-3.3L SC (VG33ER) (2002)

Page 1
background image

Throttle Cable/Linkage: Adjustments

Adjusting Accelerator Wire

NOTE:  Adjust accelerator wire with the engine warmed up to normal operating temperature and ignition switch turned to OFF.

1. Loosen lock nut, and tighten adjusting nut until throttle drum starts to move.
2. From that position, turn back adjusting nut 1.5 to 2 turns, and secure lock nut.

Throttle Full Close Switch > < Throttle Body|Specifications|Page 6841