nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Recall 03C061000: Air Bag Clockspring Modification|Page 9760 > < Recall 03C061000: Air Bag Clockspring Modification|Page 9758
Page 2
background image

-

Do not drop or impact air bag module. If any portion is deformed or cracked, replace the module.

-

Do not expose the air bag module to temperatures exceeding 90 °C (194 °F).

-

Do not allow oil, grease or water to come in contact with the air bag module.

5. Set steering wheel in the neutral position.
6. Disconnect spiral cable connector from steering wheel sub-harness and remove nut.
7. Remove dynamic damper, then using steering wheel puller, remove steering wheel. Be careful not to over-tighten puller bolt on steering wheel.

CAUTION:
-

Do not tap or bump the steering wheel.

8. Remove steering column covers, instrument panel lower LH and knee protector.
9. Disconnect spiral cable connector from air bag harness.

10. Remove the four spiral cable retaining screws. Remove the spiral cable.

CAUTION:
-

Do not attempt to disassemble spiral cable.

-

Do not apply lubricant to the spiral cable.

Recall 03C061000: Air Bag Clockspring Modification|Page 9760 > < Recall 03C061000: Air Bag Clockspring Modification|Page 9758