Xterra XE 4WD V6-3.3L SC (VG33ER) (2002)
b. Separate knuckle spindle from upper and lower ball joint studs with Tool.
During above operation, never remove ball joint nuts which are loosened in step (a) above.
Tool: 2WD Models - ST29020001 (324319-01)
Tool: 4WD Models - HT72520000 (325730-B)
c. Remove ball joint tightening nuts. Support lower link with jack.
d. Remove knuckle spindle from upper and lower links.
INSPECTION / Knuckle Spindle
Check knuckle spindle for deformation, cracks and other damage by using a magnetic exploration or dyeing test.
Bearing Spacer (2WD models)
Check bearing spacer for damage.
Needle Bearing (4WD models)
Check needle bearing for wear, scratches, pitting, flaking and burn marks.
INSTALLATION
1. Install needle bearing into knuckle spindle (4WD models).
Make sure that needle bearing is facing in the proper direction. Apply multi-purpose grease.