Achieva L4-144 2.4L DOHC VIN T SFI (1996)
Intake Manifold: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF
before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in
contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its
components.
2. Disconnect the following electrical connectors:
^
MAP sensor
^
Intake Air Temperature (IAT) sensor
^
EVAP Canister Purge solenoid
^
Fuel injector harness
3. Disconnect the vacuum hoses from the fuel regulator and the EVAP Canister Purge solenoid to the canister.
4. Remove the air cleaner duct.
5. Remove the accelerator control cable bracket.
6. Remove the stud ended generator mount bolt.
7. Remove the EGR pipe from the EGR adapter.
8. Raise and support the vehicle.
