Achieva L4-144 2.4L DOHC VIN T SFI (1996)
1. Install the balance shaft drive chain.
2. Install the crankshaft.
3. Install the balance shaft assembly. Refer to Balance Shaft Housing Replacement.
4. Time the balance shaft. Refer to Timing Balance Shafts to Engine.
5. Install the oil pan gasket. Refer to Oil Pan Replacement.
6. Install the oil pan. Refer to Oil Pan Replacement.
7. Rotate the engine 180 degrees on the stand in order to install the timing chain housing and the other components.
8. Install the timing chain. Refer to Timing Chain, Sprockets, and Tensioner Replacement.
9. Install the timing chain housing. Refer to Timing Chain Housing Replacement.
10. Install the front timing chain cover.
11. Install the upper engine mount bracket Refer to Engine Mount Replacement.
12. Install the lower engine strut mount bracket. Refer to Engine Mount Strut Replacement.
13. Install the spark plugs. Refer to Spark Plug Replacement (LD9) or Spark Plug Replacement (L82) in Powertrain Management.
14. Install the ignition coil and module assembly.
15. Connect the engine to the chain hoist and remove the engine stand fixture from the engine block.
16. Install the crankshaft balancer pulley.
17. Install the flywheel to the engine. Refer to Engine Flywheel Replacement.
18. Connect the transmission to the engine. Refer to one of the following procedures:
-
Transmission Replacement in Manual Transmission.
-
Transmission Replacement in Automatic Transmission - 4T60-E
