Achieva L4-144 2.4L DOHC VIN T SFI (1996)
Timing Chain Tensioner: Technical Service Bulletins
Engine - Timing Chain Tensioner Installation Procedure
Bulletin No.: 00-06-01-010A
Date: June 27, 2006
INFORMATION
Subject:
Timing Chain Tensioner Installation Procedure
Models:
1996-1998 Buick Skylark
1996-2002 Chevrolet Cavalier
1997-1999 Chevrolet Malibu
1996-1998 Oldsmobile Achieva
1999-2001 Oldsmobile Alero
1996-2001 Pontiac Grand Am
1996-2002 Pontiac Sunfire
1996-2001 Toyota Cavalier
with 2.4L Engine (VIN T - RPO LD9)
Attention:
This bulletin is being issued to draw attention to the proper timing chain tensioner reset and installation procedure. Warranty claims have been
generated due to confusion about the proper procedure. The service manual procedure has been updated to provide clearer instructions. The proper
procedure for resetting and installing the tensioner is included in the following text.
Supercede:
This bulletin is being revised to include additional model years and models. Please discard Corporate Bulletin Number 00-06-01-010 (Section 06 -
Engine).
Procedure
Important:
Use the following steps in order to reset the timing chain tensioner assembly to the zero position.
1.
Reset the timing chain tensioner assembly.
1.1.
Insert the tensioner plunger assembly into the tensioner housing.
1.2.
With the tensioner plunger fully extended, turn the complete assembly upside down on a bench or other flat surface.
1.3.
With the plunger face against the workbench, press firmly on the bottom of the tensioner housing.