Achieva L4-144 2.4L DOHC VIN T SFI (1996)
5. Remove the retainer from the PCM.
CAUTION: Before removing the KS module cover, carefully clean the PCM housing of any debris that may cause damage to the PCM circuitry.
6. Slide the PCM (3) and retainer from the PCM bracket.
CAUTION: In order to prevent possible Electrostatic Discharge damage to the PCM or KS module, do not touch the connector pins or soldered
components on the circuit board. Do not remove the integrated circuit boards from the carrier.
7. Remove the KS module cover.
8. Remove the KS module.
REMOVE OR DISCONNECT
1. Remove the new PCM from its packaging and check the service number to make sure it is the same number or updated number as the faulty PCM.
2. Remove the KS module cover.
INSTALL OR CONNECT
NOTE: Refer to the Latest Tech line Information on Re-Programming or Flashing procedures.
1. Install the KS module in the KS module socket.
