Achieva L4-144 2.4L DOHC VIN T SFI (1996)
Canister Purge Solenoid: Service and Repair
REMOVE OR DISCONNECT
NOTE: The EVAP canister may have released carbon particles which may have caused this parts failure. Check the EVAP canister for carbon
before returning to the vehicle to service.
1. Disconnect the purge valve electrical connector.
2. Remove the hoses (3) (4) to the purge valve.
3. Remove the purge valve (1) from the mounting bracket.
4. Remove the purge valve mounting bracket attaching nut (when replacing bracket).
5. Remove the purge valve mounting bracket.
INSTALL OR CONNECT
1. Install the purge valve mounting bracket and attaching nut.
-
Tighten the purge valve mounting bracket attaching nut to 6-10 Nm (5-8 lb. in.).
2. Slide the purge valve (1) onto mounting bracket.
3. Install the hoses (3) (4) to the purge valve (1).
4. Connect the purge valve electrical connector.
